top of page

Construction site mist cannon


This mist maker machine model 20 looks like a cannon spraying water mist to suppress construction dust for dust control at construction site. The mist cannon is based on the principle of air delivery, using the high-pressure pump to fine and atomize the water, and then the air fan will are used to spray the water mist to a longer distance and covering a larger area, thus the water mist and dust will fall after condensation, so as to achieve the purpose of dust reduction.



  • Spraying distance: 15-20m

  • Fan motor power: 3kW

  • Rotation angle: 180°​​



  • Long spray distance, wide coverage, high work efficiency, accurate spray.

  • The sprayed mist is small and fine, and when in contact with the dust, it forms a moist mist, which can quickly suppress the dust.

  • The supporting power is flexible, both 3P, 380V electric power and diesel generator set are available.

  • It can be installed on a concrete pouring platform, or it can be installed on a transport vehicle with a diesel generator set.

  • Flexible operation, remote control or manual control, horizontal rotation and spray angle can be adjusted at will, safe and reliable.

  • Compared with other dust suppression spraying equipment (spray guns, sprinklers), the water consumption can be saved by 70% -80%, and the water mist coverage area is much larger than other dust suppression spraying equipment;

  • The spraying is 15-20m, and it can be made according to the requirements of customers.

bottom of page